In this article detent (spool control 8) assembly on P40 control valves was explained. Similar steps can be followed for P80 and P120 valves. Please make sure that working area is clean before start.
End cap of control valve is disassembled with allen key 5.
Spool control is disassembled. You can use screwdriver or pneumatic drill to dismantle the spring control.
Detent washer is assembled on spool.
Detent is assembled with screwdriver.
End cap is assembled.
Detent operation is checked by pushing and pulling the lever and should not be too hard or too soft.
Please feel free to get in touch with us for your comments and suggestions.